Machine and equipment manufacturers today are feeling more pressure than ever to reduce costs without sacrificing machine performance — a balancing act difficult to achieve. OEMs often overlook a simple solution that can have a positive, long-term impact on profitability for themselves and their customers, i.e. — the elimination of bearing lubricant. By eliminating lubrication systems where possible, OEMs can reduce production costs while at the same time make their equipment more marketable and less expensive to operate for end users. What are the issues with bearing lubricant? According to a major ball bearing company, 54 percent of bearing failures are lubrication-related (Fig. 1).

In a study by the Massachusetts Institute of Technology (MIT) it was estimated approximately $240 billion is lost annually (across U.S. industries) due to downtime and repairs to manufacturing equipment damaged by poor lubrication (http:// www.azom.com/news. asp?newsID=11342). Improper bearing lubrication or re-lubrication accounts for up to 40 to 50 percent of machine failures. By eliminating lubrication from machinery, OEMs can minimize the costs and risks associated with maintenance for the end user. At the same time, costs related to the proper disposal of oil can be eliminated and the initial expenditure for ancillary components and processes (grease lines, zerks, manifolds, etc.) can be decreased.

There is a lower-cost, easier-tomaintain machine component that eliminates the total cost of bearing lubricants, i.e. — high-performance, dryrunning plastic bearings.

Hidden Costs of Lubrication

Proper lubrication delivery is critical for the operation of ball bearings, and most require continued maintenance for re-lubrication. The re-lubrication process typically requires scheduled machine downtime, which increases maintenance costs and causes a loss of production time. In addition, re-lubrication maintenance practices often fall short. While some processes are automated, the majority of re-lubrication is performed manually using a grease gun. This seemingly simple task actually involves a number of critical steps to ensure proper lubrication delivery, including correct amount of lube, the right grease gun, proper cleaning, and careful storage and handling conditions, just to name a few. In addition, it is critical to use the same grease for the entire lifespan of a bearing. The technical training division of Life Cycle Engineering conducted a study that found 80 percent of maintenance workers surveyed scored less than 50 percent when it came to the basic technical skills needed to perform their job “Bearing lubrication” was noted first on their list of tasks (http://www.lce. com/pdf/trainingneeds.pdf).